Chiller Repair in Irving, TX
When your chiller stops working, it throws off the whole day. Our technicians repair chillers in Irving, TX, starting with a proper diagnosis and an upfront quote before any work begins.
- Upfront quote before work
- 90-day parts & labor warranty
- Parts matched to your model
- Same-day service when available
How we repair your Chiller
A commercial chiller removes heat from a building or process by cooling water or glycol that is pumped to air handlers or equipment, rejecting the heat through air-cooled condensers or a cooling tower. A chiller typically includes a compressor, condenser and evaporator coils, fans, a capacitor and contactor, and a thermostat, or a water pump and pads on evaporative coolers. A technician checks airflow, electrical parts and refrigerant pressures, and inspects drains and coils.
Cooling failures in offices, server rooms and restaurants affect staff, equipment and customers, so commercial cooling calls are prioritized.
Chiller repair at a glance
- Typical repair cost$300–$2,500
- Typical service life20–30 years
- Warranty on repairs90 days parts & labor
- QuoteUpfront, before work
- Same-day visitsWhen available
Common Chiller problems we fix
What usually causes each symptom, and what our technician checks to confirm it.
Leaving water temperature too high
- Likely causes
- Low refrigerant charge, a fouled evaporator or condenser barrel, a failed compressor or stage, or high condenser water temperature.
- What our technician checks
- The technician reads approach temperatures, refrigerant pressures and compressor loading to locate the heat transfer or capacity problem.
Controller faults and nuisance shutdowns
- Likely causes
- Failed temperature or pressure transducers, loose communication wiring, or a building automation signal problem.
- What our technician checks
- Sensor readings are compared with test instruments, fault logs are reviewed, and control wiring is traced.
Low pressure or freeze protection trips
- Likely causes
- Low chilled water flow from a pump or strainer problem, low refrigerant, or a failed expansion valve.
- What our technician checks
- Flow switch and differential pressure are checked, strainers are inspected, and superheat and expansion valve operation are verified.
Oil pressure or oil level alarms
- Likely causes
- Oil migration, a failed oil heater, a clogged oil filter, or worn compressor bearings.
- What our technician checks
- Oil level, heater operation and differential oil pressure are checked, and an oil sample may be pulled for analysis.
Excessive vibration or noise
- Likely causes
- Worn compressor bearings, loose mounts, cavitation in the chilled water pump, or refrigerant flooding back.
- What our technician checks
- Vibration is measured at the compressor and pump, mounts are inspected, and suction superheat is checked.
Tripping on high head pressure
- Likely causes
- Fouled condenser tubes, failed condenser fans on air-cooled units, low condenser water flow, or non-condensables in the system.
- What our technician checks
- Condenser approach and water flow are measured, fans are verified, and the tube bundle is inspected for scale.
Quick checks you can do safely
- Record any alarm code and the time it appeared on the chiller panel.
- Confirm chilled water and condenser water pumps are running.
- Check that the building automation system is calling for the chiller.
- Look for closed valves or recent work on the water loops.
- Clear debris from around air-cooled condenser coils.
Safety first: Chillers contain large refrigerant charges, high voltage and pressurized water loops, so only qualified, EPA-certified technicians should service them, and machine rooms may require refrigerant monitors.
Still not working?
Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.
(844) 442-1999Seeing a code? Try our error code lookup or troubleshooting wizard.
Our 5-step chiller repair process
- Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
- DiagnosisThe technician inspects and tests the chiller to find the actual cause, not just the symptom.
- Upfront quoteYou get a clear price before any work starts. No surprise charges.
- RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
- Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Chiller repair cost and lifespan
National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.
Parts we replace most often
- Pressure transducer
- Temperature sensor
- Expansion valve
- Flow switch
- Condenser fan motor
- Oil heater
- Compressor contactor
We match every part to your model and serial number.
Keep your Chiller running longer
- Have condenser and evaporator tubes cleaned on a set schedule.
- Test refrigerant and oil annually.
- Log operating pressures, temperatures and amps daily.
- Keep water treatment in place to control scale and corrosion.
- Clean strainers and verify flow switches each season.
Build a maintenance plan
Create a printable monthly, quarterly and yearly checklist for every appliance in your home.
Open the schedule generatorChiller repair in Irving, TX
Hot summers and sudden cold snaps in Texas put refrigerators, freezers and ice makers in Irving under heavy load.
We provide chiller repair throughout Irving, including ZIP codes 75014, 75015, 75016, 75017, 75038 and 75039 and more, and in nearby Coppell, Euless and Addison.
In coastal parts of Texas, salt air speeds up corrosion on coils, burners, fasteners and electrical connections, especially on equipment installed outdoors.
Chiller brands we repair
Frequently Asked Questions
How much does chiller repair cost in Irving, TX?
Most chiller repairs fall roughly between $300 and $2,500, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.
Can you repair my chiller the same day?
Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.
Is the repair guaranteed?
Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.
Which brands do you service?
We work on all major brands, including Carrier, Daikin, Trane and York.
Should I repair or replace my chiller?
A typical chiller lasts about 20 to 30 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.
Other air conditioning and cooling repairs
- Cooling Tower Repair
- Evaporative Cooler/Swamp Cooler Repair
- Window AC Sleeve/Chassis Repair
- Air Conditioner Repair
- Mini-Split/Ductless AC Repair
- Portable/Window AC Unit Repair
More repair services
- Refrigerator Repair
- Washing Machine Repair
- Dryer Repair
- Dishwasher Repair
- Oven Repair
- Range Repair
- Microwave Repair
- Ice Maker Repair
- Frigidaire Cooktop Repair
- APW Wyott Food Warmer/Heat Lamp Repair
- Bio Bidet Bidet Repair
- KitchenAid Microwave Oven Repair
- Gozney Pizza Oven Repair
- Fisher Pre-Rinse Spray Station Repair
Get your chiller fixed in Irving
Upfront quote before work starts · Parts matched to your model · 90-day warranty